Click to enlarge
Introduction:
- capacity: 2-1200m³/h
- head: 3-125m
- size: 25-350mm
- speed: 1450-2900r/min
This is inline water pressure booster pump.
This pump is designed by our technician and some domestic experts.
On the basis of general vertical pump and the specification of S series centrifugal pump, it is an excellent hydraulic model.
According to the differences of temperature and medium, chemical pump and oil pump are developed from ISG series. They apply to hot water, high temperature and corrosive.
Features:
1. Inline water pressure pump booster is vertical. Inlet and outlet are at the same diameter and center line. As the valve is installed in the pipeline, it has nice appearance and small footprint. It operates with low investment. It can be used out doors with protective cover.
2. Stable, small vibration, low noise.
3. Wear resistant seal can prolong the service life of the mechanical seal.
4. Easy installation and maintenance, no need to tear down the pipeline system. The components can be removed as long as the nut at the bottom of the pump is removed.
5. Series connection and parallel connection can be selected according to the flow and head.
6. Horizontal and vertical installation can be selected according to the piping layout.
Application:
It apply to clean water, and liquid without solid particles, which is similar to water in physical and chemical properties. Water temperature shall be under 80℃.
1. Water boosting for tall building, fire fighting.
2. Water supply and discharge for industry, city.
3. Irrigation for farmland, garden.
4. Long-distance transportation.
5. Refrigeration cycle.
6. Cold and warm water circulation booster equipment.
Working Conditions:
1, The suction pressure: ≤1 0MPa,
Maximum working pressure of pump system: ≤1.6MPa,
2, The ambient temperature <40℃.
Relative humidity <95%.
3, The volume of solid particles in the transport medium is ≤0.1% of the unit volume.
The granularity: ≤0.2mm.