Verified Company
Shanghai Noulei Automation Equipment Co., Ltd.
Click to enlarge
WoodWorking Engraving
Products Range:
Wood engraving machine, Metal engraving machine, Stone engraving machine,
Advertising engraving machine, Laser engraving cutting machine, Plasma cutting machine.
1. Steel Gantry, Cast Iron uprights . High rigidity.
2. Y adopt durable driving by synchronizing wheel consist of belt and gear shaft . Big power sub-division motors keep stable moving, improve your working efficacy.
4. Power outages, breakpoint, continued carving. More intelligent. It will start the work automatically at the point from which the power cut off.
5. Using quality sensor switch, improve the machine working safty .
6. Adopt Chinese best quality Stepper drivers, supply 35m/min air run speed. Improve production. ( Servo system is optional)
7. Machine comes with Dust Collection system, Make sure clean circumstance.
8.Vacuum holding down surface with T-slot , fixing the material on table surface with dual function.
1. Carving products :
2. Machine Characteristic:
Ltaly Imported Spindle
Unique multi-axis design, based on customer needs to select the head number and the motor power,
and the distance between the nose can be adjusted freely according to the workpiece.
A machine can accomplish the workload of several machines.
More the number of axis, Please ask our sales specialist for details.
Series gear transmission, fast speed, smooth movements .
Small handle control:
Low cost, high efficiency.
Simple operation, Support the U disk transfer, various document formats.
3. Before shipment test machine
4. Applied areas:
Apply to high efficiency production of woodworking products, advertising signs,
density board cut sculpture hollow out, a relief carving machine, face furniture adornment board, etc,
and can be carved out copper, aluminum, plastic board (carving machine metal need to add cistern)
5. 3D Engraving
with rotation axis machine engraving 3D cylindrical object .
Machine
6. We have high-quality parts suppliers:
7. Technical parameters:
| Machine Model | NL-1325 | NL-1530 | NL-2030 |
| Working Area | 1300x2500mm | 1500x3000mm | 2000x3000mm |
| Spindle Power | 3000W/4500W | ||
| Max Spindle Speed | 24000rpm/min | ||
| Guide rails | Linear square rail | ||
| Working mode | Steper | ||
| Repeat Positioning Accuracy | 0.05mm | ||
| Max No-load Speed | 4000mm/min | ||
| Max Working Speed | 3000mm/min | ||
| Tool Diameter | φ3.175mm~φ6mm | ||
| Z-axis Travel | 0~200mm | ||
| Operating voltage | AC380/220V 50Hz | ||
| Carving Command | G code, *uoo, *mmg, *plt | ||
| Cooling mode | Water/Air (optional) | ||
| System | NCstudio | ||
Please ask our sales specialist for details.
8. CE certification.