Verified Company
Puyang Toptech Commercial And Trade Co., Ltd.
Click to enlarge
Formosa pvc resin K67 :
PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form.
They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
Specification:
Product: PVC Resin
| Item | SG1 | SG2 | SG3 | SG4 | SG5 | SG6 | SG7 | SG8 |
K value | 77-75 | 74-73 | 72-71 | 70-69 | 68-66 | 65-63 | 62-60 | 59-55 |
Viscosity, ml/g | 156-144 | 143-136 | 135-127 | 126-119 | 118-107 | 106-96 | 95-87 | 86-73 |
Average polymerization |
|
| 1350-1250 | 1250-1150 | 1100-1000 | 950-850 | 950-850 | 750-650 |
Number of impurity particle≤ | 30 | 30 | 30 | 30 | 30 | 30 | 40 | 40 |
Volatiles content %,≤ | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 |
Appearing density g/ml≥ | 0.42 | 0.42 | 0.42 | 0.42 | 0.42 | 0.45 | 0.45 | 0.45 |
Residual after sieve 0.25mm mesh≤ | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
0.063mm l≥ | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
Number of grain/400cm2≤ | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
Plasticizer absorbency value of 100g resin | 25 | 25 | 25 | 22 | 19 | 16 | 14 | 14 |
Whiteness %,≥ | 74 | 74 | 74 | 74 | 74 | 74 | 70 | 70 |
Residual chlore thylene content mg/kg≤ | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Ethylidene chloride mg/kg≤ | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
Quality standard: It's complied to the standard GBT5761-93.
Application:
SG-1 is used in producing high-grade electrical insulating material
SG-2 is used in producing electrical insulating material, common soft products and film
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products,
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes
SG-5 is used in producing transparent products section bar, hard tube and decorative materials
SG-6 is used in producing clear foil, hard board and welding rod
SG-7, SG-8 is used in producing clear foil, hard injection molding.
Package: Packed in a kraft paper bag lined with PP-woven bag, Net weight per bag: 25± 0.25kg.
Storage and transport: Prevent from rain, snow, humid, sunshine, throwing and other mechanical damage.