Product detail:KEY FEATURES:

• HEATER/SENSOR FAILURE DETECTION: If the sensor circuitfails the display reads S--E and cuts off the heater power. If theheater circuit fails the display will read H--E and will cut off theheater power.
  
  
• TEMPERATUE LOCK-OUT FEATURE: The temperature can be locked by password code for production line management.
  
  
• ISOLATEDIRON HOLDER WITH TIP CLEANER: Made of low abrasive brass shavingsinstead of conventional sponges to meet RoHS requirements. Cleansbetter and no water is necessary.
  
  
• LOWVOLTAGE OUTPUT WITH SAFETY OPERATION: The power unit is isolated fromthe A.C. line by a transformer and allows 32Vac to drive the heatingelement. Solder wand runs from 32 Volts for safety and with a 80W powerceramic heater for a super-fast heat-up and quick temperature recovery.The solder wand is attached with heat resistant, non-burning, flexible5-wire cord.
  
  
• ESD SAFE AND SPIKE FREECIRCUITRY: The Zero Voltage electronic switching design also protectsvoltage and current sensitive components (CMOS devices, etc.) againstdamaging current and transient voltage spikes commonlyproduced by lessefficient, mechanically switched stations.
  
  
• DETACHABLEAC POWER CORD WITH PLUG: Engineered AC outlet for alternating AC powercord with plug and connector specially designed for individual CEcountries requirements.
  
  
• EARTH JACK: With a grounding connector, For personal ESD grounding devices if required.
  
  
• OPTIONALSMD TWEEZERS : This optional feature is especially designed for SMDchips, SOT, Flat pack ICs etc. rework. The TWZ80 Tweezer is equippedwith 32V/40W* x 2 heaters which are interchangeable with the solderingIron wand as an option. Be sure before proceeding with this operationthat main pwer switch is OFF to avoid any damage to the unit.