|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
applied welded steel wire mesh line
diameter 3.0-6.0(mm)
Welding mesh size 50X50-300X300(mm)
Welding width 3000(mm)
MainUsage:Welding fence meshes for railway, highway, maintain, building meshes for bridge, road and storey and mine supporting meshes.
Features of product:
1,CNC wheel-step design to provide high accurate mesh grid
2,Electrode lift system to extend electrode life
3, Line wire loop and balance system to ensure wire mesh accuracy.
4,Line wire vertical straightening system to provide high quality
5,Unique high speed air cylinder used on welding electrode to provide high reliability.
6,Welding pressure steplessly adjustation to apply multiple wire diameter
7,High speed mesh cutting system,
8,Automatically high speed cross wire feeding system.
9,Automatic mesh turning, stacking and conveying system
TECHNICAL DATA
Model | DNW-CNC2000 | DNW-CNC2500 | DNW-CNC3000 | ||
Installed power(kva) | 7*125 | 9*125 | 11*125 | ||
System coltagte(v) | 380V 50Hz | 380V 50Hz | 380V 50Hz | ||
Control voltage(v) | 24V | 24V | 24V | ||
Max.mesh width | 2000 | 2500 | 3000 | ||
Line wire spacing | ≥25mm steplessly adjustable | ||||
Cross wire spacing | ≥50mm steplessly adjustable | ||||
Wire diameter(mm) | 3-6 | 3-6 | 3-6 | ||
Max.welding capacity | 6+6 | 6+6 | 6+6 | ||
Max.wlding speed(time/min) | 30-60 | 30-60 | 30-60 | ||
Max.welding spot nos.(group) | 41 | 51 | 61 | ||
Pressed air(MPa ) | ≥0.8 | ≥0.8 | ≥0.8 | ||
Wire feeding method | In coil/automatic feeding; servo Stepping traction mesh | ||||
Caterconer accutracy | ≤2 | ≤2 | ≤2 | ||
Material | galvanized wire, cold-rolled ribbed wire or low carbon steel wire | ||||
Each part shows
Refering photos
If you have different requirements other than the above types, please kindly inform us about it and we will offer the
solution for you. Believe that if you are in need of the welding machine, you can get the satisfied ones from us.
Click for original picture
Legal status confirmed
