|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
strongwin with ISO biomass briquetting press machine
General introduction of strongwin
with ISO biomass briquetting press machine
strongwin with ISO biomass briquetting press machine Producing Process :
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
5. Carbonized the briquette stick
6. Complete charcoal production lines include crusher, drier, charcoal briquette machine, carbonization furnace.
the material can pressed by strongwin
with ISO biomass briquetting press machine
biomass briquetting press machine not only suitbale for straw ,but also used in sugarcane residue coffee husk Cotton Stalks ,Tobacco waste Mustard Stalk ,Jute waste Bamboo Dust ,Tea waste,Wheat Straw ,Palm husk ,Soybeans
husk ,Rice Husks ,Forestry wastes ,Wood Chips and many other Agro wastes.But the Moisture Content Should be Less than 12%, grain size is below 5*5mm.
Parameters of strongwin with ISO biomass briquetting press machine
Model( biomass briquetting press machine ) | YBJ-III | YBJ-IV | YBJ-80 |
Power(kw) | 11 | 15 | 18.5 |
Electric heater | 1.5kw*3pcs | 1.5kw*3pcs | 2kw*3pcs |
Capacity(kg/h) | 110-160 | 160-220 | 220-320 |
Dimension(m) | 1.7x0.66x1.5 | 1.7x0.66x1.5 | 1.7x0.8x1.3 |
Raw material Size | ≤5mm | ||
Size of finished production | 30-80mm | ||
Shape of finished production | Round, quadrangular, hollow hexagonal etc. | ||
related picture of strongwin with ISO biomass briquetting press machine
final products pressed by strongwin with ISO biomass briquetting press machine
Click for original picture
Legal status confirmed
