|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
For good plasticizing effect, we have different design of screw barrel to meet customer's demand.
Single injection screw barrel for plastic injection molding machine | |||
Diameter | Φ15mm-Φ500mm |
Designing
| Screw structure and compression ratio can be designed according to different products & different clamping force requirement |
Materials | 38CrMoAlA (JIS SACM645) SKD61 | Application | All kinds plastic & rubber and All kinds of glass fiber, the PPA ,PPS ,PA6T ,LCP, electric wood powder, magnetic powder ,iron powder and other special engineering plastics |
Nitride Case Depth | 0.5mm-0.8mm | Technology | 1)Longer time Gas Nitriding treatment 2)special anti-wear & abrasion alloy (bimetallic) 3)tungsten carbide 4)cobalt base alloy 5)stainless steel 6)Gh113 nickel based alloy |
Nitride Hardness | 950-1020HV | Packing | Wrapped up by film in wooden |
Nitride Brittleness | ≤Grade One | Payment Term | T/T , L/C |
Surface Roughness | Ra0.4um | Delivery Term | 25 working days |
Screw Straightness | 0.015mm | Port Departure | Shanghai/Ningbo |
Alloy Hardness | HRC58-62 | Min. Order | 1 set |
Alloy Depth | 0.5mm-0.8mm | Common Nitrided:2.5-4years Bimetallic: much longer lifetime. | |
Guarantee | |||
Single injection screw barrel for plastic injection molding machine | |
Production scope: | |
Screw diameter | Φ15~Φ500 |
Maximum screw length | 10,000mm |
Barrel inner bore diameter | Φ500mm |
Mould Clamping Force | 100KN-35000KN |
Shot Weight | 30-30000g |
Screw can be mated with different heads. | Barrel can be mated with different nozzles. |
The compression ratio of the screw can be designed according to different products and mixtures. | |
Technical Parameter: | |
Nitride Case Depth | 0.6mm-0.9mm |
Nitride Hardness | 960-1150HV |
Nitride Brittleness | ≤Grade One |
Surface Roughness | Ra0.4um |
Screw Straightness | 0.015mm |
Duplex Alloy Depth | 1.5mm-3.5mm |
Duplex Alloy Hardness | HRC60-75 |
Chromium Coating Thickness | 0.025~0.10mm |
| Raw Material | The Finnished Product Processing Requirments | ||
| 38CrMoAla, SACM645, 42CrMo | Nitriding Treatment | ||
| 42CrMo, AISI4140 | Hard chrome coated layer | ||
| Cr12MoV, SKD11, SKD61, YXMI, EFZD,DC53, SKH55, SKH59, SKH58, SKH51, SKH-9, ASP60, ASP25, CW6Mo5Cr4V2 | High frequency quenching | ||
| 4Cr5MoSiV1, SKD-61, SKD-11 | Spraying bimetal alloy layer and nitriding treatment | ||
| YPT72, DAC-MAGIC, 4Cr5MoSiV1 | whole bimetallic cladding stainless steel | ||
| HPM38, SI36, SUS440, 9Cr18MoV | High frequency quenching |
we can make any specification of extruder screw barrel and injection screw barrel for Haitian, Demag, Engle, Nigro bossi, arburg,NPM, BOY, Husky, Fanuc, billion, Sumitomo, Nippon Steel, Toshiba, Nissei, Mitsubishi and etc. We also can supply all types of screw and barrel according to your different requirements.
Our screw barrel can ensure the well performance and low energy consumption of Injection molding machine. We insist on the principle of quality first, honest to customers, the quickest service for customers” to improving us, our goal is to satisfy our customers.
2013 CHINAPLAS EXHIBITION
About O.S.D :
Click for original picture
