Brand:Xianyang taisite

Origin:China Shanxi

Model:PL6-D

MOQ:1Sets

Supply Time:Week

Product detail: The PL6-D Intelligent Automatic handsheet former manufactured by our company is applicable to research and experiments in papermaking research institutes and paper mills.In the laboratory, plant, mineral and other fibers by cooking, pulping, pulp screening, the pulp standards ease, and then into the pulp barrel, stirring after rapid filitration molding, and conducting pressing, vacuum drying in the machine, forming diameter 200mm circular sheet, the sheet can be as a further physical detection pattern.

This machine is a set of vacuum pumping, press, vacuum drying in one of the all electric control molding equipment.Which can be used in the form of the full automatic control and manual control of the two ways.Drying of wet paper using instrument control and remote intelligent control.This machine is suitable for vacuum forming and consider various superfine fiber, nano fiber, super thick paper page drying.

The order of the automatic hand sheet production corresponds to the selected program. Selection of production mode: Automatic with ability to proceed to manual control,Control of molding process is operated by 6-position switch,Automatic control is realized by the CPU Siemens (SIMATIC) that allows to create and maintain individual programs (up to 35 ea.),The machine is equipped with 3 drying units. The drying unit is made of stainless steel. The drying unit begin to work by pressing a Start button.The machine has displays for monitoring the temperature and time.Control system uses SIEMENS S7 series PLC as a controller.Using TP700 HMI panel to monitor the data.And on the HMI to complete the formulation function, supplemented by the button and the indicator light to control and monitor the control point.

Machine meets : ISO 5269/2 & ISO 5269/3, 5269/2, NBR 14380/99, TAPPI T- 205, DIN 54358, ZM V / 8/76

Main parameters:
1. forming pattern: a diameter not greater than 200mm;  the maximum thickness of 10mm
2. the material cylinder volume: 10 liters
3. drying temperature：≤105℃
4. drying time (quantitative 30-80g/m2): 3-6 minutes
5. electric heating dryer: 1.5KW×3/220V
6.PID temperature control
7.Temperature sensor: PT100
8. vacuum pump: 1.5KW/220V; vacuum degree: 0.092-0.098MPa
9. white water pump: 370W; maximum suction process: 8m; maximum head: 20m
10. Dimensions: 1880mm×780mm×1400mm
11. Total power:7.2KW