| TT-13'502 E |
Heating & Cooling |
| Features |
- Two-circuit Temperature Control Unit and Water Chiller
- Combi-Unit with 2x6 kW heating capacity and 14 kW cooling capacity
- Equipped with 2 independent circuits: (Circuit 1: 10°C until 90°C) (Circuit 2: 10°C until 40°C)
- Corrosion resistant stainless steel or bronze components
- 2 self-optimizing microprocessor controller with digital display of the set and actual value
|
| Technical Specifications |
| Mode of Operation |
Water |
| Temperature Range (°C) |
Circuit 1 - Temperature from 10 to 90 |
| Circuit 2 - Temperature from 10 to 40 |
| Ambient Temperature (°C) |
+2 (min) / +45 (max) |
| use anti-freeze below +2°C to protect the chiller from becoming frozen and defective |
| Cooling Capacity (kW) |
8 (both circuits) |
| Cooling Method |
Air Cooled |
| Refrigerant Agent |
R-134a |
| Heating Capacity (kW) |
2 x 6 |
| Electronic Flow Control |
Yes |
| Pump Capacity |
| Motor (kW) |
2 x 0.75 |
| Pressure Mode (bar) |
2 x 4.5 (max) |
| Vacuum Mode (mH²O) |
- |
| Flow Rate (l/min) |
2 x 75 (max) |
| Others |
| Water Tank Capacity (L) |
2 x 25 |
| Dimensions (mm) incl. Castors |
980 (L) x 660 (W) x 1300 (H) |
| Weight (kg) |
220 |
| Voltages (V) |
3x400 / 3x220 |
| Frequency (Hz) |
50 / 60 |
| Color |
RAL 7001 (Silver Grey) |
| |
|
Post Info: Home » Products » Machinery » Plastic & Rubber Machinery » Plastic Auxiliary Equipment » Mould Temperature Controller »
Click for original picture
